THE MOST PRESCRIBED BRAND OF FULL CONTOUR ZIRCONIA.

BRUXZIR solid zirconia is a monolithic zirconia crown,bridge,cement retained implant crown, inlay or onlay with no porcelain overlay.The material was originally intended to provide a durable, more esthetic alternative to pfms or cast gold restoration for demanding situations like bruxzers and areas with limited occlusal space .Now, with the BRUXZIR shaded formulation ,there is no compromise in regards to the esthetics. BRUXZIR restorations exhibit improved translucency and colours similar to natural dentition.

Designed and milled using cad/cam technology. BRUXZIR solid zirconia is sintered for 2 hours at 1530 degree Celsius to achieve optimum strength. The final BRUXZIR restorations emerge nearly bulletproof and is then glazed to a smooth surface.

Prescribe BRUXZIR

• 1. Ideal for all types of posterior restoration including Implants.
• 2. Ideal for bruxzers who have destroyed previous natural teeth or previous dental restoration.
• 3. Conservatively prepare as thin as 0.5mm with feather edge margins, much like you would do full metal preps.

Preparation Requirements for BRUXZIR Crowns & Bridges

• 1. IShoulder preparation not needed, feather edge is okay. It is a conservative preparation similar to full-cast gold, so any preparation with at least 0.5 mm of occlusal space is accepted.
• 2.Minimum occlusal reduction of 0.5 mm; 1 mm is ideal.

Cementation : Recommendations for BRUXZIR Crowns & Bridges

• 1. Ceramir® Crown & Bridge (Doxa Dental; Newport Beach, Calif.) or a resin-reinforced glass ionomer cement such as RelyX™ Luting Cement (3M ESPE; St. Paul, Minn.) or GC Fuji Plus™ (GC America; Alsip; Ill).
• 2.For short or over-tapered preparations, use a resin cement such as RelyXTM Unicem (3M ESPE) or Panavia™ F2.0 (Kuraray; New York, N.Y.).

Instructions for Adjusting and Polishing BRUXZIR Crowns & Bridges

Since BRUXZIR restorations are made from solid zirconia, you may find them harder to adjust with conventional bur kits. To easily adjust, polish or remove these restorations, we have developed specially designed burs and polishers. The diamond burs and polishers in the new BRUXZIR Adjustment & Polishing Kit are ideal for adjusting and polishing zirconia, and the diamonds also work extremely well if you ever need to cut off or provide access for a root canal through a zirconia crown. Always use light pressure with water and air spray when adjusting ceramic restorations to avoid micro-fractures.